BPNGL - ROLL-ON PERMANENT STAMP PAD INK JET BLACK

  • MSDS: BPNGL
  • Manufacturer: SANFORD CORP
  • Product Name: ROLL-ON PERMANENT STAMP PAD INK JET BLACK
  • National Stock Number: 7510-00N032680
Product Identification

Product ID:ROLL-ON PERMANENT STAMP PAD INK JET BLACK
MSDS Date:04/29/1987
FSC:7510
NIIN:00N032680
MSDS Number: BPNGL

Responsible Party
SANFORD CORP
2740 WASHINGTON BLVD
BELLWOOD, IL 60104
US

Emergency Phone: 312-547-6650

Info Phone: 312-547-6650

Cage: 86874

Contractor
SANFORD CORPORATION
BELLWOOD, IL 60104 US

Telephone: 1-800-323-0749

Cage: 86874

Ingredients

ETHANOL, 2-BUTOXY-; (ETHYLENE GLYCOL MONOBUTYL ETHER). FLSH

CAS: 111-76-2

RTECS: KJ8575000

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


4.1.

RTECS: 9999999ZZ


COMPLETE.

RTECS: 9999999ZZ


BENZYL ALCOHOL

CAS: 100-51-6

RTECS: DN3150000


ETHYL ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


PHENOL (SARA III)

CAS: 108-95-2

RTECS: SJ3325000

OSHA PEL 5 PPM,S

ACGIH TLV: 5 PPM,S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INK MAY BE HARMFUL OR FATAL IF
SWALLOWAED. AVOID EYE CONTACT. AVOID PROLONGED SKIN CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:INDUCE VOMITING AND CALL MD. EYE: FLUSH THOROUGHLY FOR
AT LEAST 15 MINUTES AND CALL MD. SKIN:FLUSH WITH COPIOUS AMOUNTS OF
WATER. CALL MD . INHAL:MOVE TO FRESH AIR. SUPPORT BREATHING (GIV E
O2/ARTF RESP) .

Fire Fighting

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL AND DISCARD AS
SOLID WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID PROLONGED SKIN CONTACT. KEEP CAP
ON BOTTLE WHEN NOT IN USE. DO NOT SQUEEZE BOTTLE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE UNDER NORMAL USE CONDITIONS.
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:SEE ING 1
Vapor Pres:SEE ING 1
Vapor Density:SEE ING 1
Spec Gravity:SEE ING 1
Evaporation Rate & Reference:SEE INGREDIENT 1
Solubility in Water:SEE INGREDIENT 1
Appearance and Odor:SEE INGREDIENT 1

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISCARD AS SOLID WASTE. DISPOSAL MUST BE IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.